Industrial IP camera
The largest and most diverse from resolution perspective product category is the skoopia platform of Industrial IP camera (click for overview). Industrial IP cameras, but also Medical IP cameras differ from regular IP camera on three parameters:
-
Long life cycle of industrial IP camera
-
Upgrade options for industrial IP camera solutions
-
Replication of industrial IP camera solutions.
​
Numerous applications make use of Industrial IP cameras. Also Medical IP cameras are found in numerous applications. Particularly if latency is less of an issue, industrial and medical IP cameras often provide the most pragmatic approach to implement a vision solution.
​
For the key advantages of Industrial IP cameras over other video outputs (i.e. industrial AHD cameras, SDI cameras or industrial CVBS cameras), click here.
​
Long life cycle | Industrial IP camera | Medical IP camera
skoopia Industrial IP cameras will last for a long time in market. Where typical regular (security) IP products change every three months, skoopia Industrial and Medical IP cameras will remains identical (form, fit, function) for 5+ years.
Moreover, an End of Life of the industrial IP camera will be announced upfront (typically 6 months or more before factual End of Life) and in this period you will have the opportunity to place a last time buy order (LTB). This allows you as OEM to manage your product life cycle most adequately.
Upgrade | Industrial IP camera | Medical IP camera
Regular IP cameras are present in abundant forms and sizes and resolutions. Changes are made continuously, as the key market, being the security industry, provides limited value on product stability. Every installation of IP cameras is different and as such more value is placed on new functions and higher resolution, rather then product stability or long product life cycle. Moreover, most of these cameras are final products, so integration of the Industrial IP camera or OEM camera is not required.
​
skoopia's Industrial IP camera platform is focused on minimizing the engineering effort of the OEM implementing next generation Industrial IP cameras. skoopia Industrial IP cameras provide the following benefits w.r.t. upgrade:
-
All industrial IP cameras in the skoopia portfolio have the same size, a single board 42mm x 42mm
-
All industrial IP cameras in the skoopia portfolio make use of the same API (Application Programming Interrface).
This allows a smooth upgrade from mechanical perspective (same size), as well as from a software perspective (same API).
​
Naturally, if new functions that the upgraded industrial IP camera provides are addressed, they have to be added to the interfacing software, but all existing functions will remain identical.
Replicate | Industrial IP camera | Medical IP camera
Replicability of camera settings seems trivial, but OEMs address applications that demand specific settings of the industrial IP camera.
​
skoopia industrial and medical IP cameras allow replicability of settings via a single config file, which can be distributed to other - but except from MAC address - identical industrial IP cameras. This function seems trivial, but the vast majority of IP cameras do not offer the ability to export and import settings, or only offer the ability to export and import for the same identical camera (same MAC address).
​
skoopia allows to replicate part of the settings (e.g. only the camera settings that are affecting the factual video image) or full settings (factual video image, but also network settings and/or user settings). It allows OEMs to easily and exactly meet the specific application demands using the industrial IP camera.
DOWNLOAD ->
Industrial IP camera | Medical IP camera
Underneath you find skoopia's portfolio of industrial IP cameras as well as medical IP cameras. In the next sections we will discuss individual cameras. For generic information on IP cameras click here.
Industrial IP cameras | Medical IP cameras ​
​
IP camera Dimensions Sensor Zoom True DOL
skoopia name l x b x h name Video output opt/dig WDR
​
2 MP board camera (1080p / Full HD/ 1920x1080)
21C42IP2 42mm x 42mm x 2mm IMX307 H.265, H.264, MJPEG n.a./32x no *
23C42IP2 42mm x 42mm x 2mm IMX385 H.265, H.264, MJPEG n.a./32x no *
​
3 MP board camera (2048x1544)
32C42IP2 42mm x 42mm x 2mm IMX123 H.265, H.264, MJPEG n.a./32x yes *
​
5 MP board camera (2592x1944)
51C42IP6 42mm x 42mm x 2mm IMX335 H.265, H.264, MJPEG n.a./32x yes
​
8 MP board camera (2160p / 4K / 3820x2160)
85C42IP2 42mm x 42mm x 2mm IMX274 H.265, H.264, MJPEG n.a./32x yes *
​
​
12 MP board camera (3000p / 4000x3000)
124C42IP2 42mm x 42mm x 2mm IMX226 H.265, H.264, MJPEG n.a./32x no *
​
block camera (1080p / Full HD / 1920x1080)
23Z36IP2 52mm x 54mm x 119mm IMX385 H.265, H.264, MJPEG 36x/32x no *
23Z36IP5-LL 52mm x 54mm x 119mm IMX385 H.265, H.264, MJPEG 36x/32x no
​
video server (1080p / Full HD / 1920x1080)
21X2-IP5/6 42mm x 42mm x 2mm SDI input H.265, H.264, MJPEG n.a./32x n.a.
​
Industrial IP camera | single board (42mm x 42mm) IMX290 | 21C42IP5
skoopia 21C42IP5 is an industrial IP camera using the sensitive Sony Starvis Exmor R sensor IMX290.
​
Key features of this industrial IP camera
* Very senstive (Sony Starvis Exmor R - IMX290) 1/2.8"
* Powerful DSP from HiSilicon - 3516
* Triple stream in different resolutions and/or codec
* 1920x1080p30 (Full-HD), 1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC), 704x576 (4CIF/PAL), 640x480 (VGA), 352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* PoE board as option
* WDR
This product formed the base for our H.265 industrial IP camera. Although this camera will be available for quite some time, for new implementations we also recommend to look for the 22C42IP5 -an identical camera with the IMX307 sensor, in case WDR is not an issue or for industrial IP camera 23C42IP5, which is based on the successor sensor of the IMX290, the IMX327.
​
DOWNLOAD ->
Industrial IP camera | single board (42mm x 42mm) IMX290 | 21C42IP5 - details
In this section the skoopia 21C42IP5, skoopia's industrial IP camera with the Sony Starvis Exmor R sensor IMX290 is described in detail w.r.t.
-
pinning and dimensions
-
the conceptual structure
of the industrial IP camera.
This is described to provide insight in the capability set of skoopia's Industrial IP cameras. For all other cameras, the pinning and dimensions are similar if not identical. The conceptual structure is identical for all other cameras, although they make use of different sensors (although all Sony Starvis Exmor R) or different DSPs (although all are HiSilicon DSPs).
1) SD, Molex P/N : 53047-1110
Pin No. Pin Name Description
1 DAT2 SD data2
2 DAT3 SD data3
3 CMD Command signal
4 PWR Power +3.3V
5 CLK Clock signal
6 GND GND
7 DAT0 SD data0
8 DAT1 SD data1
9 CD Card Detect signal
10 WP Write Protection signal
11 FACTORY Factory reset signal
SWITCH input signal
​
2) AUDIO/ALARM, Molex P/N : 53047-0510
Pin No. Pin Name Description
1 AUDIO_IN Audio Line_In signal
2 AUDIO_OUT Audio Line_Out signal
3 GND GND
4 ALARM_IN Alarm In signal
5 ALARM_OUT Alarm Out signal
​
3) IR_LED, Molex P/N : 53047-0310
Pin No. Pin Name Description
1 DC +12V DC +12V Power output
2 IR_LED_INPUT IR_LED CDS signal input from IR board
3 GND GND
4 IR_LED ON/ IR_LED_On/Off TTL signal
OFF OUTPUT output to IR board
​
4) ZOOM/FOFUS, Molex P/N : 53047-0810 (Optional)
Pin No. Pin Name Description
1 Focus A- Focus In-
2 Focus A+ Focus In+
3 Zoom A- Zoom In-
4 Zoom A+ Zoom In+
5 Zoom B+ Zoom Out+
6 Zoom B- Zoom Out-
7 Focus B- Focus Out-
8 Focus B+ Focus Out+
​
​
5) CVBS (or UART), Molex P/N : 53047-0410
Pin No. Pin Name Description
1 PHY_LINK PHY Link indication output signal
2 GPIO7_1 GPIO(or UART1_Tx signal)
(or UART1_TXD)
3 CVBS_OUT Composite output signal
(or UART1_RXD) (or UART1_Rx signal)
4 GND GND
6) Power & Network, Molex P/N : 53047-0610
Pin No. Pin Name Description
1 +12V DC +12V input
2 PHY_TX+ Ethernet TX+ signal output
3 PHY_TX- Ethernet TX- signal output
4 PHY_RX+ Ethernet RX+ signal input
5 PHY_RX- Ethernet RX- signal input
6 GND GND
​
7) DC IRIS, Molex P/N : 53047-0410
Pin No. Pin Name Description
1 Drive - Normally connect to GND
2 Drive + Iris motor drive
3 Control + Iris motor control +
4 Control - Iris motor control -
​
8) DAY & NIGHT, Molex P/N : 53047-0210
Pin No. Pin Name Description
1 Motor - Night Mode : Active Low
2 Motor + Day Mode : Active High
​
9) USB, Molex P/N : 53047-0410
Pin No. Pin Name Description
1 VSUB USB power output DC5V
2 USB_DM USB data -
3 USB_DP USB data +
4 GND GND
Industrial IP camera | single board (42mm x 42mm) IMX307 | 22C42IP5 / 21C42IP2
skoopia 22C42IP5 is an industrial IP camera using the sensitive Sony Starvis Exmor R sensor IMX307.
​
Key features of this industrial IP camera
* Senstive (Sony Starvis Exmor R - IMX307) 1/2.8"
* Powerful DSP from HiSilicon (22C42IP5) or Ambarella (21C42IP2)
* Triple stream in different resolutions and/or codec
* 1920x1080p30 (Full-HD), 1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC), 704x576 (4CIF/PAL), 640x480 (VGA), 352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* PoE board as option
​
Consider this camera, if WDR is not a must and you are looking for a cost effective Full HD industrial IP camera.
DOWNLOAD ->
Industrial IP camera | single board (42mm x 42mm) IMX385 | 23C42IP2
skoopia 23C42IP2 is an industrial IP camera using the super sensitive Sony Starvis Exmor R sensor IMX385 and 1080p60 capability.
​
Key features of this industrial IP camera
* Super senstive (Sony Starvis Exmor R - IMX385) 1/1.8"
* Powerful DSP from Ambarella (23C42IP2)
* Triple stream in different resolutions and/or codec
* 1920x1080p60, 1920x1080p30 (Full-HD), 1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC), 704x576 (4CIF/PAL),
640x480 (VGA), 352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* PoE board as option
​
Select this industrial IP camera if you require extreme low light visibility or require 1080p60 as video output.
​
DOWNLOAD ->
Industrial IP camera | single board (42mm x 42mm) IMX335 | 51C42IP5
The industrial IP camera skoopia 51C42IP5 uses the Sony Starvis Exmor R sensor IMX335. This industrial IP camera allows resolution up to 2592 x 1944.
​
Key features of this industrial IP camera
* 5.1 MP Sony Starvis Exmor R - IMX335 1/2.8" (4:3 aspect ratio sensor)
* Powerful DSP from HiSilicon - 3516
* Three different streams in different resolutions and/or codec
* 1920x1080p30 (Full-HD), 1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC), 704x576 (4CIF/PAL), 640x480 (VGA),
352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* WDR
* PoE board as option
​
Select this camera if you require 4:3 aspect ratio at 5 MP and require a cost effective solution.
DOWNLOAD ->
Industrial IP camera | single board (42mm x 42mm) IMX274 | 85C42IP2
The industrial IP camera skoopia 85C42IP2 uses the Sony Starvis Exmor R sensor IMX415, offering the ability to stream 4K video.
​
Key features of this industrial IP camera
* 8.5 MP Sony Starvis Exmor R - IMX415 1/2.8"
* Super powerful DSP from Ambarella
* Four different streams in different resolutions and/or codec
* 3820x2160p30, 2560x1440p60, 1920x1080p60, 1920x1080p30,
1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC),
704x576 (4CIF/PAL), 640x480 (VGA), 352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* WDR
* PoE board as option
​
This industrial IP camera is the entry level industrial or medical IP camera for people demanding 4K resolution at an affordable price level.
DOWNLOAD ->
Industrial IP camera | single board (42mm x 42mm) IMX226 | 124C42IP5-LL / Industrial IP camera | dual board (42mm x 42mm) IMX226 | 124C42IP2
The industrial IP camera skoopia 124C42IP5-LL provides a resolution of 12 MP in 4:3 aspect ratio (offering: 4000x3000p).
​
Key features of these industrial IP camera
* 12.4 MP Sony Starvis Exmor R - IMX412 1/1.7"
* Super powerful DSP from HiSilicon (124C42IP5-LL) / Ambarella (124C42IP2)
* Four different streams in different resolutions and/or codec
* 4000x3000p, 3820x2160p30, 2560x1440p60, 1920x1080p60,
1920x1080p30,1280x1024(SXGA), 1280x720(HD), etc
* H.265, H.264 (base, main, high profile), MJPEG​
* 42mm x 42mm single board
* Multiple connectors for flexible integration
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* PoE board as option
​
Select this industrial IP camera if you require very high resolution (12 M) and very low light sensitivity.
DOWNLOAD ->
Industrial IP camera | Block Camera | IMX385 | 23Z36IP5-LL / 23Z36IP2
DOWNLOAD ->
skoopia 23Z36IP5-LL/23Z36IP2 is a blend of two cameras.
-
From IP perspective, it is based on the industrial IP camera 23C42IP5-LL / 23Z42IP2.
-
From block camera perspective, it is based on the 23Z36L-LL.
The block camera can be driven for zoom/focus via the GUI (Graphical User
Interface) of the IP camera, but also via RS-485 and VISCA.
​
Key features of this industrial IP block camera
* 36x optical zoom
* Super senstive (Sony Starvis Exmor R - IMX385) 1/1.8"
* Powerful DSP from HiSilicon (23Z36IP5-LL) or Ambarella (23Z36IP2)
* Triple stream in different resolutions and/or codec
* 1920x1080p60, 1920x1080p30 (Full-HD), 1280x1024(SXGA), 1280x720(HD), 704x480 (4CIF/NTSC), 704x576 (4CIF/PAL), 640x480 (VGA), 352x288 (CIF), 320x240(QVGA)
* H.265, H.264 (base, main, high profile), MJPEG​
* 52mm x 54mm x 119mm
* Plural protocols supported: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, FTP, UPnP, RTP, RTSP, RTCP, DHCP, ARP, Zeroconf
* Easy to use build in Web interface
* Onvif-S compliant with leading Video Management Systems (e.g. Milestone)
* DHCP or Static IP address
* PoE board as option
​
Select this industrial IP block camera if you require 36x optical zoom in combination with extreme low light visibility or simply want to avoid sourcing block camera and LVDS to IP converter boards from different entities.
​
skoopia hereby declares that all IP camera modules marked with an * are compliant with the National Defense Authorization Act (NDAA), Section 889, and these cameras do not contain chipsets or components from the list of banned suppliers under this law.
